Nokia Lumia 610C and 610 Touch Screen Problem Solution

Solutions in this article are for Nokia Lumia 610C Touch Screen problem. If your Nokia Lumia 610 or Lumia 610C touch screen is not working diagrams in this post can be helpful to you.

First of all you should test that your phone’s firmware is not causing this problem. To do that you need to access On-Device Diagnostics Tool in your mobile phone. If you don’t know how to do that read this guide How to Test Diagnostics in Nokia Lumia 610C.

After accessing Diagnostics App go to Touch Test, you will see a blank white screen at touching the screen a trail will be left on the screen. If that works then you need to flash your phone.

Nokia Lumia 610C Touch Test

If that does not work then study this Nokia Lumia 610C Touch Screen Problem troubleshooting flowchart. Follow this flowchart and hopefully your phone will start working again.

Nokia Lumia 610C Touch Screen Troubleshooting Flowchart

If you have further questions please don’t hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

Touch screen problems and solutions

Screen Touch: Type of component that helps to operate a mobile phone by
touching the screen. Touch Screen is available in different sizes. It normally has 4
Points Namely: - (+), (-), (RX), (TX). Screen Touch is also called PDA. It is
controlled by the CPU. In some Mobile Phones there is an Interface IC called PDA
IC or Screen Touch IC.
 

Faults:

1. Screen Touch not Working.
2. Only Half Screen Touch Works.
3. One key is pressed and some other key works.


Solution:


1. Check Settings if the Mobile Phone has Both Keypad and Touch Screen.
2. Clean and Resold PDA Tips and PDA Connector.
3. Change PDA.
4. Check Track of the PDA Section and Jumper if Required.
5. PDA IC: Heat or Change.
6. CPU: Heat, Reball or Change.


Note:

If the PDA Problem is not solved by Hardware Then Reload Software to Solve the
Problem